TOP FIVE APPLIANCE REPAIR PROBLEMS AND THEIR SOLUTIONS

August 2018 ยท 3 minute read

As durable and dependable as they may be, home appliances sometimes break down and require repair. Here are the five most common problems appliance repair technicians encounter.

1. Stalled Washing Machine

Maybe you have gone to transfer a load from the washer into the dryer only to find it soaking in a soapy bath? Although the machine may have broken down at the midst of its cycle, the more probable explanation is really a damaged lid or door switch. Because your washer relies on a door detector to make sure its lid is shut, it may stop running if there’s a problem with the switch. In most cases, the switch is ruined by rough use, like slamming the lid after falling in a load.



2. Cold Dryer

As you are undoubtedly aware, clothes dryers use heat to remove moisture from wet clothes and accessories. If lg appliance repair ceases to carry out its main purpose, there’s a good chance the problem is really a blown thermal fuse. When this component breaks, the dryer will not produce any heat at all.

The Fix: Replace the thermal fuse and inspect the cycling thermostat. If the heat yields, the machine needs to function as expected.

3. Leaky Freezer

Modern freezers occasionally complete defrost cycles to rescue homeowners the problem of defrosting the entire device from time to time. Through these cycles, melted water goes to the drip pan via the defrost drain. However, when this defrost drain is clogged with debris and food, water will start to flow out onto the lower shelves. In most instances, the melted water will freeze, forming a sheet of ice to the ground of the freezer.

The Fix: Possessing a appliance repair technician clean or replace the defrost drain.

4.

All top-load washing machines rely upon a component called an agitator that’s used to swish, swirl, and spin clothes through the full cycle. When this part will not move, the appliance can’t perform its own function. Since they often assume the problem cannot be fixed, many homeowners simply replace their older washer using a brand-new one. This is often a mistake, as the fix costs are generally only a fraction of the price of a new device.

The Repair: Have the engine coupling replaced.

5. Silent Dishwasher

When a dishwasher turns on but doesn’t operate, the issue often involves a component referred to as a float switch. Used to control the amount of water which enters the appliance, the component ensures normal operation. But because it is accessible from within the unit, it’s feasible for a knife, fork, or other item to jam the part, locking it in fixed position that prevents it from discharging the water required to run the machine.

The Fix: Nine days out of ten, a service technician can get rid of the object that’s jamming the float button without damaging the component.

An experienced appliance repair technician can address some of the aforementioned difficulties.